L.A.C Conveyors Blog

1” pitch Plastic Modular Belt data

Jun 23

Written by:
Tuesday, June 23, 2009 11:04 AM  RssIcon

1” pitch Plastic Modular Belt

 

Description

  • 0% Open area
  • High lateral stiffness
  • Food approved materials
  • Rod diameter 5 mm
  • Open window sprockets

 Available accessories

  • Flights and Scoops
  • Side guards
  • Hold down devices
  • Grip Top modules

 Standard belt widths in increments of 50mm. Non-standard widths are offered in increments of 16.66mm. Smallest possible width 83.4mm. Non-bricklayed belts 50mm and 100mm wide. Real belt widths are in most cases 0.1%to 0.3%wider.

 

The nominal tensile strength is valid for 23 °C (73 °F).The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed the admissible tensile force may vary from 100% to 20%of the nominal tensile strength.

 

 

1” pitch Plastic Modular Belt with Grip Top Profiles

 

Description

  • 0% Open area
  • Food approved materials
  • Abrasion resistant Grip Top, high friction
  • Rubber hardness: 50 shore A
  • Rod diameter 5mm
  • Open window sprockets

 Proposed pattern

  • Indent 50mm
  • Fully covered by Grip Top or in rows of any distance in multiples of 25.4mm

 Available accessories

  • Flights
  • Hold down devices

 Standard belt widths in increments of 50mm. Non-standard widths are offered in increments of 16.66mm. Minimum width 200mm

For more info please follow this link http://www.lacconveyors.co.uk/Modular-Belt-Conveyors.aspx 

Tags:
Categories: